Abstract
The ground verification of a spacecraft control algorithm is commonly done via air bearing facility. Air bearing testbeds are frequently developed for testing a three-axis stabilized spacecraft control algorithm but hardly for a spin-stabilized spacecraft. A modular testbed for testing a spinning spacecraft has been developed at Surrey Space Centre initially for the real-time verification of a prolate spinner slew control algorithm. This testbed is made from commercial off-the-shelf components with a modular system design approach through rapid control prototyping using Matlab xPC Target and is extendable to other rapid control prototyping techniques. It is equipped with a novel low-cost monocular vision system for attitude determination with accuracy of 0.06 deg and angular velocity accuracy of 0.15 deg/s0.15 deg/s. For the current specification, a cold-gas propulsion system is fixed to the testbed with a two-degree-of-freedom thruster set that can deliver up to 0.25 N of thrust and an air bearing capability that gives three degrees of freedom with a maximum tilt angle of 30 deg. In this paper, the testbed implementation is described, and the test platform is verified.