Abstract
We designed a novel experimental set-up to pseudo-simultaneous measure size-segregated filtration efficiency (ηF), breathing resistance (ηP) and potential usage time (tB) for 11 types of face protective equipment (FPE; four respirators; three medical; and four handmade) in the submicron range. As expected, the highest ηF was exhibited by respirators (97±3%), followed by medical (81±7%) and handmade (47±13%). Similarly, the breathing resistance was highest for respirators, followed by medical and handmade FPE. Combined analysis of efficiency and breathing resistance highlighted trade-offs, i.e. respirators showing the best overall performance across these two indicators, followed by medical and handmade FPE. This hierarchy was also confirmed by quality factor, which is a performance indicator of filters. Detailed assessment of size-segregated aerosols, combined with the scanning electron microscope imaging, revealed material characteristics such as pore density, fiber thickness, filter material and number of layers influence their performance. ηF and ηP showed an inverse exponential decay with time. Using their cross-over point, in combination with acceptable breathability, allowed to estimate tB as 3.2-9.5hours (respirators), 2.6-7.3hours (medical masks) and 4.0-8.8hours (handmade). While relatively longer tB of handmade FPE indicate breathing comfort, they are far less efficient in filtering virus-laden submicron aerosols compared with respirators.
[Display omitted]
•FFP3 respirators showed highest filtration efficiency and breathing resistance.•Multi-layered micro/nano-scale fibres of medical masks offer ηF comparable to respirators.•Highest quality factor was obtained for respirators while the lowest for handmade masks.•FFP3 showed maximum potential usage time and quality factor at acceptable breathability.•SEM images revealed dense aerosol layers deposited on facemasks with thinner fibres.