Abstract
The InflateSail (QB50-UK06) CubeSat, designed and built at the Surrey Space Centre (SSC) at the University of Surrey, UK, for the Von Karman Institute (VKI), Belgium - was one of the technology demonstrators for the QB50 programme. The 3.2 kilogram 3U CubeSat was equipped with a I metre long inflatable boom and a 10m(2) deployable drag sail. InflateSail's primary mission was to demonstrate the effectiveness of using a drag sail in Low Earth Orbit (LEO) to dramatically increase the rate at which satellites lose altitude and re-enter the Earth's atmosphere and it was one of 31 satellites that were launched simultaneously on the PSLV (polar satellite launch vehicle) C-38 from Sriharikota, India on 23rd June 2017 into a 505km, 97.44 degrees Sun-synchronous orbit (SSO). Shortly after orbital insertion, InflateSail booted-up, and, once safely clear of the other satellites on the launch, it automatically activated its payload firstly, deploying a 1 metre long inflatable boom comprising a metal-polymer laminate tube, using a cool gas generator (CGG) to provide the inflation gas, and secondly, using a brushless DC motor at the end of the boom to extend four lightweight bistable rigid composite (BRC) booms to draw out the 3.1m x 3.1m square, 12 micron thick polymer drag-sail. As intended, the satellite immediately began to lose altitude, and re-entered the atmosphere just 72 days later thus demonstrating for the first time the de-orbiting of a spacecraft using European inflatable and drag sail technologies. The boom/drag-sail technology developed by SSC will next be used on the RemoveDebris mission, due for launch in 2018, which will demonstrate the capturing and de-orbiting of artificial space debris targets using a net and harpoon system.