Abstract
Conventional solid-to-solid conversion cathodes in rechargeable aluminium batteries suffer from sluggish reaction kinetics and cumulative structural degradation. Here the authors disclose a solution-to-solid conversion chemistry using molten salt electrolytes to achieve fast-charging capability and good cycling stability.
Conventional solid-to-solid conversion-type cathodes in batteries suffer from poor diffusion/reaction kinetics, large volume changes and aggressive structural degradation, particularly for rechargeable aluminium batteries (RABs). Here we report a class of high-capacity redox couples featuring a solution-to-solid conversion chemistry with well-manipulated solubility as cathodes-uniquely allowed by using molten salt electrolytes-that enable fast-charging and long-lived RABs. As a proof-of-concept, we demonstrate a highly reversible redox couple-the highly soluble InCl and the sparingly soluble InCl3-that exhibits a high capacity of about 327 mAh g(-1) with negligible cell overpotential of only 35 mV at 1 C rate and 150 & DEG;C. The cells show almost no capacity fade over 500 cycles at a 20 C charging rate and can sustain 100 mAh g(-1) at 50 C. The fast oxidation kinetics of the solution phase upon initiating the charge enables the cell with ultrafast charging capability, whereas the structure self-healing via re-forming the solution phase at the end of discharge endows the long-term cycling stability. This solution-to-solid mechanism will unlock more multivalent battery cathodes that are attractive in cost but plagued by poor reaction kinetics and short cycle life.