Abstract
A network of specialist laboratories support the International Monitoring System (IMS) of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) with re-measurements of radionuclide samples, including xenon gas. The measurement of four xenon fission product radionuclides (133Xe, 135Xe, 131mXe and 133mXe) can be used to detect an underground nuclear explosion. Laboratories use a range of techniques to measure the radionuclides, including beta-gamma (β−γ) coincidence spectrometry. These highly-sensitive measurements are capable of detecting concentrations of down to 500 atoms of 133Xe in a few cm3 of xenon. In some detector systems, detection of the metastable isomers (131mXe and 133mXe) can be more challenging due to interferences between the signatures of different radionuclides. Recent work has shown that using high-purity Germanium (HPGe) high-resolution gamma detectors, these interferences can be reduced, lowering the dependence of the detection limits on radionuclide sample isotopic composition. One downside of these detectors is the reduction in detection efficiency, which impacts the overall detection sensitivity; so assessing different detector systems is a priority for radionuclide laboratories. This work presents a coincidence detector system comprising of a plastic scintillator gas cell and a large-crystal high-purity germanium detector. The energy resolution, coincidence detection efficiency, MDA and interference factors are determined from measurements of synthetic radioxenon gas samples.
•A plastic scintillator and HPGe β−γ coincidence system has been configured for the measurement of isotopes of radioxenon•Calculations show that this type of setup can improve the detection limits compared to other systems.•High-resolution γ-detectors can separate Xe and Cs X-rays, decreasing interference.