Abstract
Ni/LnOx-type catalysts (Ln = La, Ce, Sm or Pr, denoted as LNO, CNO, SNO and PNO, respectively) were prepared via a citrate sol-gel method, characterized, and evaluated for the dry reforming of biogas. For the calcined catalysts, the formation of LaNiO3 perovskite crystallites with high purity was observed in the case of La, whereas NiO-LnOx mixed oxides were obtained for the other lanthanides. The reduction treatment led to the formation of medium-sized (∼15 nm) and highly dispersed Ni nanoparticles in LNO following the decomposition of the LaNiO3 perovskite, in contrast to the other catalysts, where bigger Ni crystallites were formed (∼30 nm). As a result, LNO was shown to possess a higher catalytic activity in comparison to the other materials. Regarding the catalytic stability, LNO displayed a considerable activity loss followed by a high pressure drop due to reactor blockage, meaning that the use of Sm (Ni/Sm2O3) can be considered as an alternative strategy to restrict catalyst deactivation. As evidenced by the characterization of the spent catalysts, the deactivation for the most part can be attributed to the extensive coke deposition over the catalysts. The coke deposited was found to be both in the form of more disordered/amorphous carbon, as well as in the form of highly crystalline and multi-walled carbon nanotubes.
•Ni/LnOx catalysts (Ln = La, Ce, Sm or Pr) were tested for biogas dry reforming.•LaNiO3 was formed for La and segregated NiO-LnOx for the other lanthanides.•Decomposition of LaNiO3 perovskite led to smaller Ni nanoparticles.•LNO presented improved activity but high activation energy and reduced stability.•Deactivation observed due to amorphous and crystalline coke formation.