Abstract
Conventional bridge weigh-in-motion (BWIM) uses a bridge influence line to find the axle weights of passing vehicles that minimize the sum of squares of differences between theoretical and measured responses. An alternative approach, probabilistic bridge weigh-in-motion (pBWIM), is proposed here. The pBWIM approach uses a probabilistic influence line and seeks to find the most probable axle weights, given the measurements. The inferred axle weights are those with the greatest probability amongst all possible combinations of values. The measurement sensors used in pBWIM are similar to BWIM, containing free-of-axle detector sensors to calculate axle spacings and vehicle speed and weighing sensors to record deformations of the bridge. The pBWIM concept is tested here using a numerical model and a bridge in Slovenia. In a simulation, 200 randomly generated 2-axle trucks pass over a 6 mlong simply supported beam. The bending moment at mid-span is used to find the axle weights. In the field tests, 77 pre-weighed trucks traveled over an integral slab bridge and the strain response in the soffit at mid-span was recorded. Results show that pBWIM has good potential to improve the accuracy of BWIM. © 2018, Canadian Science Publishing. All rights reserved.