Abstract
Traditional Autoradiography is an imaging modality used in life sciences where thin ex-vivo tissue sections are placed in direct contact with autoradiographic film. High resolution autoradiograms can be obtained using low energy radioisotopes, such as H where an intrinsic 0.1-1 μm spatial resolution can be achieved due to limited β- path length. Several digital alternatives have been presented in recent years to replace conventional film as the imaging medium, but the spatial resolution of film remains unmatched. Although silicon-based imaging technologies have demonstrated higher sensitivity compared to conventional film, the main issue that remains is spatial resolution. We address this here with an investigation into the design parameters that impact on spatial resolution when imaging uncollimated β-found in Autoradiography. The study considers Monte Carlo simulation of the energy deposition process, the charge diffusion process in silicon and the detector noise, and this is applied to a range of radioisotope β energies typically used in Autoradiography. Finally an optimal detector geometry to obtain the best possible spatial resolution for a specific technology and a specific radioisotope is suggested. ©2009 IEEE.