Abstract
Latest advances in road profile sensors make the implementation of pre-emptive suspension control a viable option for production vehicles. From the control side, model predictive control (MPC) in combination with preview is a powerful solution for this application. However, the significant computational load associated with conventional implicit model predictive controllers (i-MPCs) is one of the limiting factors to the widespread industrial adoption of MPC. As an alternative, this paper proposes an explicit model predictive controller (e-MPC) for an active suspension system with preview. The MPC optimization is run offline, and the online controller is reduced to a function evaluation. To overcome the increased memory requirements, the controller uses the recently developed regionless e-MPC approach. The controller was assessed through simulations and experiments on a sport utility vehicle demonstrator with controllable hydraulic suspension actuators. For frequencies <4 Hz, the experimental results with the regionless e-MPC without preview show a ~10% reduction of the root mean square value of the vertical acceleration of the sprung mass with respect to the same vehicle with a skyhook controller. In the same frequency range, the addition of preview improves the heave and pitch acceleration performance by a further 8% to 21%.