Abstract
Surface treatments of silicon carbide have been investigated with the aim of improving the strength of the bond between the ceramic and an epoxy adhesive. Three surface conditions have been characterised; as-fired, air re-fired and KrF laser processed. A number of characterisation techniques have been used to determine the morphological and chemical changes that have occurred to the surface. Scanning electron microscopy of the re-fired and laser processed samples showed surfaces that appeared glassy, with the laser processed surface showing a different morphology. X-ray photoelectron spectroscopy indicated both treatments had oxidised the surface and the laser processed surface also had a greater concentration of hydroxyl groups. The wettability of both surfaces had improved and the laser processed surface was found to be highly hydrophilic. Mechanical testing of joints prepared with this technique showed them to have the highest strength in tension, with the locus of failure being cohesive. © 2013 The Authors.