Abstract
The successful development of ferroelectric polymer devices depends on the effective fabrication of polar ferroelectric crystalline nanostructures. We demonstrate, by scanning X-ray microdiffraction using synchrotron light, the heterogeneous character of high aspect ratio one-dimensional nanoarrays of poly(vinylidene fluoride-co-trifluoroethylene) copolymers supported by a residual polymer film. They were prepared by melt and solution template wetting, using porous anodic aluminum oxide as a template. The spatial evolution of different polymorphs from the mixture of paraelectric and ferroelectric crystal forms (residual film) to the pure ferroelectric form (nanoarray) is evidenced for the samples prepared by solution wetting. However, for samples prepared by melt wetting the ferroelectric phase is exclusively obtained in both the residual film and nanoarray. The crystal nuclei formed in the polymer film connected to the nanoarray play a key role in determining the formation of a crystallinity distribution gradient, where the crystallinity decreases along the first 5-10 microns in the nanorods reaching a steady value afterwards. The minimum decrease in crystallinity is revealed for samples prepared by melt wetting. The results reported in this work endeavour to enhance the understanding of crystallization under confinement for ferroelectric copolymers and reveal the parameters for improving the ferroelectric character of polymer nanostructures.