Abstract
During the COVID-19 pandemic, many millions have worn masks made of woven fabric, to reduce the risk of transmission of COVID-19. Masks are essentially air filters worn on the face, that should filter out as many of the dangerous particles as possible. Here the dangerous particles are the droplets containing virus that are exhaled by an infected person. Woven fabric is unlike the material used in standard air filters. Woven fabric consists of fibres twisted together into yarns that are then woven into fabric. There are therefore two lengthscales: the diameters of: (i) the fibre and (ii) the yarn. Standard air filters have only (i). To understand how woven fabrics filter, we have used confocal microscopy to take three dimensional images of woven fabric. We then used the image to perform Lattice Boltzmann simulations of the air flow through fabric. With this flow field we calculated the filtration efficiency for particles a micrometre and larger in diameter. In agreement with experimental measurements by others, we find that for particles in this size range, filtration efficiency is low. For particles with a diameter of 1.5 micrometres our estimated efficiency is in the range 2.5 to 10%. The low efficiency is due to most of the air flow being channelled through relatively large (tens of micrometres across) inter-yarn pores. So we conclude that fabric is expected to filter poorly due to the hierarchical structure of woven fabrics, they are expected to filter poorly.