Abstract
Persulfate oxidation processes, with and without activation using ultraviolet light (respectively UV/PS and PS) have the potential to degrade anthropogenic chemicals in water. However, little is known about the impact of PS or UV/PS pre-oxidation on downstream formation of disinfection by-products (DBPs). In this study the three antibiotic chloramphenicols (chloramphenicol and two of its analogues [thiamphenicol and florfenicol], referred to collectively as CAPs), which frequently occur in wastewater-impacted source waters used by drinking water treatment plants, were selected as model antibiotic compounds. The formation of carbonaceous and nitrogenous disinfection by-products, including halomethanes, haloacetonitriles and halonitromethanes, during chlorination and chloramination preceded by PS and UV/PS was investigated. No significant concentrations of haloacetonitriles and halonitromethanes were detected during chlorination. During chloramination chloramphenicol formed a considerable amount of dichloronitromethane (e.g., 3.44±0.33% mol/mol at NH 2 Cl dose =1 mM) and trichloronitromethane (e.g., 0.79±0.07% mol/mol at NH 2 Cl dose =1 mM), compared with THM and HAN formation. PS pre-oxidation achieved a statistically significant reduction in trichloromethane formation from chlorination, and in HAN and HNM formation from chloramination. Although UV/PS slightly increased dichloroacetonitrile formation during chloramination, it significantly decreased dichloronitromethane and trichloronitromethane formation during chloramination. Overall, the use of PS and UV/PS has the potential to have contrasting impacts on DBP formation in heavily wastewater-impacted waters, depending on the disinfection method. Hence, their application needs to be carefully balanced against the downstream effect on DBP formation.