Abstract
Accurate measurement of naturally occurring radionuclides in blast furnace slag, a by-product of the steel industry, is required for compliance with building regulations where it is often used as an ingredient in cement. A matrix reference blast furnace slag material has been developed to support traceability in these measurements. Raw material provided by a commercial producer underwent stability and homogeneity testing, as well as characterisation of matrix constituents, to provide a final candidate reference material. The radionuclide content was then determined during a comparison exercise that included 23 laboratories from 14 countries. Participants determined the activity per unit mass for 226Ra, 232Th and 40K using a range of techniques. The consensus values obtained from the power-moderated mean of the reported participant results were used as indicative activity per unit mass values for the three radionuclides: A0(226Ra) = 106.3 (34) Bq·kg−1, A0(232Th) = 130.0 (48) Bq·kg−1 and A0(40K) = 161 (11) Bq·kg−1 (where the number in parentheses is the numerical value of the combined standard uncertainty referred to the corresponding last digits of the quoted result). This exercise helps to address the current shortage of NORM industry reference materials, putting in place infrastructure for production of further reference materials.
[Display omitted]
•Current availability of reference materials for naturally occurring radioactive material has been expanded upon.•A blast furnace slag reference material has been developed to support the steel industry and regulations regarding its use in building materials.•A comparison exercise of 23 laboratories was used to determine consensus values for the activity per unit mass of selected radionuclides.•Infrastructure has been built for future development of reference materials in support of naturally occurring radioactive materials.